Parts is Parts
Hey guys, I have some new parts available. We are in the process of building a new and improved site for Pangea Speed. With that being said I have decided to just post the new parts on the blog. If you are interested in purchasing any of these parts feel free to email me at andy@pangeaspeed.com . I will be posting PayPal buttons for these parts shortly so if that fits your fancy you can buy that way.
Here are the new Pangea Speed chain tensioners. They are made out of 12 gauge stainless steel so they will never rust. They are built to fit a 20mm (.79in) they are a tad loose on a 3/4 (.75in) axle but will still work. If you have a 1 in axle they can easily be drilled out to 1 in. They can be used on any flat axle plate all you have to do is mount a post for them to rotate against. I like to use a 1/4-20 socket head cap screw. Check out video below to see how they work. $25/pair
Here are the new Pangea Speed chain tensioners. They are made out of 12 gauge stainless steel so they will never rust. They are built to fit a 20mm (.79in) they are a tad loose on a 3/4 (.75in) axle but will still work. If you have a 1 in axle they can easily be drilled out to 1 in. They can be used on any flat axle plate all you have to do is mount a post for them to rotate against. I like to use a 1/4-20 socket head cap screw. Check out video below to see how they work. $25/pair
This is the new licence plate bracket we have come up with. there are two versions, one with a tail light and one with out. They are both built out of .090 5052 aluminum. Every bracket is hand welded by yours truly. The aluminum has been given a special glass bead treatment to achieve the satin finish, this finish is also great if you decide to lay some paint on it. The tail light unit is predrilled to accept a 1956 chevy tail light. The bracket is designed to work with a 20mm (.79in) axle but will work with a 3/4 (.75in) or can easily be drilled to fit a 1 in axle. no light mount $100, with light mount $110 (light not included)
